Advantech CIRCUIT BOARD, ROM-7421 Q7 NXP i.MX6DP 1GHz 0~60C (ROM-7421CE-MDA1E)
SKU:
ROM-7421CE-MDA1E
Kategori: Advantech, ARM/RISC Solutions, Boards & Cards, IoT / Industrial
Tag: advantech
Deskripsi
| Category | Attribute | Value |
| Display | Graphic Engine | 2 IPUs. OpenGL ES 2.0 for 3D, BitBlt for 2D and OpenVG 1.1 |
| Display | H/W Video Codec | Decoder: MPEG-4 ASP, H.264 HP, H.263, MPEG-2 MP, MJPEG BP Encoder: MPEG-4 SP, H.264 BP, H.263, MJPEG BP |
| Display | HDMI | Up to 1920 x 1080 at 60 Hz |
| Display | LVDS | 2 channels 18/24-bit, up to 1920 x 1200 @ 60Hz |
| Form Factor | Form Factor | Advantech Q7 CPU Module Series |
| I/O | Audio | HD Audio with I 2 S |
| I/O | CAN | 1x |
| I/O | GPIO | 8-bit GPIO |
| I/O | I2C Bus | 2x |
| I/O | PCIe | 1 PCIe 1 Lan |
| I/O | SATA | 1 SATA II |
| I/O | SDIO | 4-bit SDIO |
| I/O | Serial port | 2 x RS-232 |
| I/O | SPI Bus | 2 SPI |
| I/O | USB | 4 x USB 2.0 |
| Memory | Capacity | On-board DDR3 1 GB |
| Memory | Flash | 4 GB eMMC for O.S. and 4 MB NOR Flash for Advantech boot loader |
| Memory | Technology | DDR3 1066MHz |
| Processor | CPU | NXP ARM® Cortex®-A9 i.MX6 Quad core |
| Operating System | Linux | Yocto Linux & Android |
| Environment | Operational Temperature | 0 ~ 60°C |
| Power | Power Supply Voltage | 5V |
| Ethernet | Chipset | NXP i.MX6 integrated RGMII |
| Watchdog Timer | WatchDog Timer | 256 Level timer interval, from 0~128 sec |
| Certification | EMC | CE/FCC Class B |
| Physical | Dimension (mm) | 70x70mm |
| RTC | RTC | Yes |
Informasi Tambahan
| Brand | Advantech |
|---|
Produk Terkait
Advantech WISE-4600 4AI/4DI I/O Module (WISE-S614-A)
Advantech WISE-4600 6DI/1RS-485/1RS-485 or RS-232 I/O Module (WISE-S672-A)
Mikrotik KNOT LR9 kit
Rp3.644.685
UniFi Access Hub
Rp4.142.520
- Powered by 802.3bt (PoE++) switch
- Three 802.3af PoE ports for UniFi readers and G3 Flex surveillance camera
- 12V powered and dry relays compatible with most locks
- Four inputs for motion sensors, request-to-exit devices and door position switch
- Managed with UniFi Access Controller in UDM-Pro
- DIN-rail mounting
Note: UniFi Dream Machine Pro is required to run UniFi Access
