Cisco Embedded Wireless Controller on C9105AX Access Point (C9105AXI-EWC-F)

Rp10.656.000

SKU: C9105AXI-EWC-F Kategori: , ,
Deskripsi

Item

Specification

Part numbers

Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas

●  C9105AXI-x: Cisco Catalyst 9105 Series

Cisco Catalyst 9105AX Access Point: Wall Plate, with internal antennas

●  C9105AXW-x: Cisco Catalyst 9105 Series

Cisco Catalyst 9105AX Teleworker Access Point: Indoor environments, with internal antennas

●  C9105AXIT-x: Cisco Catalyst 9105 Series
(Shipped along with Infrastructure kit – Power Injector and Ethernet Cables)

Cisco Catalyst 9105AX Teleworker Access Point: Wall Plate, with internal antennas

●  C9105AXWT-x: Cisco Catalyst 9105 Series
(Shipped along with Wall Plate kit – Cradle and Ethernet Cables)

Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas, with embedded wireless controller

●  C9105AXI-EWC-x: Cisco Catalyst 9105 Series

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Cisco Wireless LAN Services

Accessories

●  Mounting bracket: AIR-AP-BRACKET-W4= (available as spare)
●  Spacer kit: C9105AXW-KIT (sold separately)

Software

Catalyst 9105 AXI

●  Cisco Unified Wireless Network Software Release 8.10.MR3 or later
●  Cisco IOS XE Software Release 17.3.1, or later

Catalyst 9105AXW

●  Cisco Unified Wireless Network Software Release 8.10MR3 or later
●  Cisco IOS XE Software Release 17.3.1 or later

Supported wireless LAN controllers

●  Cisco Catalyst 9800 Series Wireless Controllers
●  Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

●  2×2 MIMO with two spatial streams
●  Maximal Ratio Combining (MRC)
●  802.11n and 802.11a/g
●  20- and 40-MHz channels
●  PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
●  802.11 Dynamic Frequency Selection (DFS)
●  Cyclic Shift Diversity (CSD) support

802.11ac

●  2×2 downlink MU-MIMO with two spatial streams
●  MRC
●  802.11ac beamforming
●  20-, 40-, 80- MHz channels
●  PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  CSD support
●  WPA3 support

802.11ax

●  2×2 uplink/downlink MU-MIMO with two spatial streams
●  Uplink/downlink OFDMA
●  TWT
●  BSS coloring
●  MRC
●  802.11ax beamforming
●  20-, 40-, 80- channels
●  PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
●  802.11 DFS
●  CSD support
●  WPA3 support

Integrated antenna

Catalyst 9105AXW

●  2.4 GHz: Peak gain 3 dBi, internal antenna
●  5 GHz: Peak gain 5 dBi, internal antenna

Catalyst 9105AXI

●  2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
●  5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces

Catalyst 9105AXW

●  1x 100/1000/2500 Base-T (Ethernet) Uplink Interface
●  3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)
●  Management console port (RJ-45)
●  USB 2.0 at 4.5W
●  Passthru Port

Catalyst 9105AXI

●  1x 10/100/1000 Base-T (Ethernet) Uplink Interface
●  Management console port (RJ-45)

Indicators

●  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions
(W x L x H)

●  Access point (without mounting brackets):

◦    C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)

◦    C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)

Weight

Cisco Catalyst 9105AXW

●  0.8 lb. (373.2g)

Cisco Catalyst 9105AXI

●  0.7 lb. (329.5g)

Input power requirements

●  802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE)
●  Cisco power injector, AIR-PWRINJ6=
●  802.3af PoE
●  Cisco power injector, AIR-PWRINJ5= ( Note: This injector supports only 802.3af)

Catalyst 9105AXI

PoE power

2.4-GHz radio

5-GHz radio

Link speed

802.3af (PoE)

2×2

2×2

1G

Catalyst 9105AXW

PoE power

2.4-GHz radio

5-GHz radio

Link speed

USB

LAN1 PSE

802.3af (PoE)

2×2

2×2

2.5G mGig

Disabled

Disabled

802.3at (PoE+)

2×2

2×2

2.5G mGig

Either USB or LAN1 PSE enabled.

Environmental

Cisco Catalyst 9105AXW

●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
●  Operating temperature: 32° to 122°F (0° to 50°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft (3000 m)

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2×2 to 1×1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled.

Cisco Catalyst 9105AXI

●  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
●  Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
●  Operating temperature: 32° to 122°F (0° to 50°C)
●  Operating humidity: 10% to 90% (noncondensing)
●  Operating altitude test: 40˚C, 9843 ft.(3000 m)

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2×2 to 1×1 on the 2.4 GHz radio.

Available transmit power settings (Max/Min)

●  2.4 GHz

◦    20 dBm (100 mW)

◦    -7 dBm (0.2 mW)

●  5 GHz

◦    20 dBm (100 mW)

◦    -7 dBm (0.2 mW)

Regulatory domains

Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.

Compliance

●  Safety:

◦    IEC 60950-1

◦    EN 60950-1

◦    UL 60950-1

◦    IEC 62368-1

◦    EN 62368-1

◦    UL/CUL 62368 – 1

◦    CAN/CSA-C22.2 No. 60950-1

◦    AS/NZS60950.1

◦    UL 2043 – Only for C9105AXI

◦    Class III equipment

●  Emissions:

◦    CISPR 32 (rev. 2015)

◦    EN 55032 (rev. 2012/AC:2013)

◦    EN 55032 (rev. 2015)

◦    EN61000-3-2 (rev. 2014)

◦    EN61000-3-3 (rev. 2013)

◦    KN61000-3-2

◦    KN61000-3-3

◦    AS/NZS CISPR 32 Class B (rev. 2015)

◦    47 CFR FCC Part 15B

◦    ICES-003 (rev. 2016 Issue 6, Class B)

◦    VCCI-CISPR 32

◦    CNS (rev. 13438)

◦    KN-32

◦    QCVN 118:2018/BTTTT

●  Immunity:

◦    CISPR 24 (rev. 2010)

◦    EN 55024 + AMD 1 (rev. 2010)

◦    EN 55035: 2017

◦    KN35

●  Emissions and immunity:

◦    EN 301 489-1 (v2.1.1 2017-02)

◦    EN 301 489-17 (v3.1.1 2017-02)

◦    QCVN (18:2014)

◦    QCVN 112:2017/BTTTT

◦    KN 489-1

◦    KN 489-17

◦    EN 61000-6-1: 2007

●  Radio:

◦    EN 300 328 (v2.1.1)

◦    EN 301 893 (v2.1.1)

◦    AS/NZS 4268 (rev. 2017)

◦    47 CFR FCC Part 15C, 15.247, 15.407

◦    RSP-100

◦    RSS-GEN

◦    RSS-247

◦    China regulations SRRC

◦    LP0002 (rev 2018.1.10)

◦    Japan Std. 33a, Std. 66, and Std. 71

●  RF safety:

◦    EN 50385 (rev. Aug 2002)

◦    ARPANSA

◦    AS/NZS 2772 (rev. 2016)

◦    EN 62209-1 (rev. 2016)

◦    EN 62209-2 (rev. 2010)

◦    47 CFR Part 1.1310 and 2.1091

◦    RSS-102

●  IEEE standards:

◦    IEEE 802.3

◦    IEEE 802.3ab

◦    IEEE 802.3af/at

◦    IEEE 802.11a/b/g/n/ac/ax

◦    IEEE 802.11h, 802.11d

●  Security:

◦    802.11i, Wi-Fi Protected Access 2 (WPA2), WPA3

◦    802.1X

◦    Advanced Encryption Standard (AES)

●  Extensible Authentication Protocol (EAP) types:

◦    EAP-Transport Layer Security (TLS)

◦    EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

◦    Protected EAP (PEAP) v0 or EAP-MSCHAP v2

◦    EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

◦    PEAP v1 or EAP-Generic Token Card (GTC)

◦    EAP-Subscriber Identity Module (SIM)

Datarate/Transmit Power/ Receive sensitivity

●  For information about Datarate, Transmit power and Receive Sensitivity, refer to Cisco RF details

Transmit power and receive sensitivity

 

 

 

5 GHz Radio

2.4 GHz Radio

 

Spatial streams

Number of active antennas

Total TX power (dBm)

RX sensitivity (dBm)

Total TX power (dBm)

RX sensitivity (dBm)

802.11/11b

1 Mbps

1

2

20

-99

11 Mbps

1

2

20

-91

802.11a/g

6 Mbps

1

2

20

-97

20

-93

24 Mbps

1

2

20

-89

20

-86

54 Mbps

1

2

20

-80

20

-78

802.11n HT20

MCS0

1

2

20

-96

20

-93

MCS15

2

2

20

-75

20

-73

802.11n HT40

MCS0

1

2

20

-93

MCS15

2

2

20

-72

802.11ac VHT20

MCS0

1

2

20

-96

MCS8

1

2

20

-74

MCS0

2

2

20

-94

MCS8

2

2

20

-71

MCS9

2

2

802.11ac VHT40

MCS0

1

2

20

-93

MCS9

1

2

20

-69

MCS0

2

2

20

-91

MCS9

2

2

20

-66

802.11ac VHT80

MCS0

1

2

20

-90

MCS9

1

2

20

-66

MCS0

2

2

20

-88

MCS9

2

2

20

-63

802.11ax HE20

MCS0

1

2

20

-96

20

-93

MCS11

1

2

19

-66

19

-64

MCS0

2

2

20

-95

20

-91

MCS11

2

2

19

-65

19

-63

802.11ax HE40

MCS0

1

2

20

-93

MCS11

1

2

19

-63

MCS0

2

2

20

-92

MCS11

2

2

19

-62

802.11ax HE80

MCS0

1

2

20

-90

MCS11

1

2

19

-60

MCS0

2

2

20

-89

MCS11

2

2

19

-59